The Patriot Magwell by PistolGear was designed to make reloads both quicker and smoother. Unlike the Patriot’s big brothers, the Operator and the UnLimited, the Patriot was not made for competitive shooters (although a viable option for gamers) but for Law Enforcement and Concealed Carry permit holders.
The funnel on the Patriot magwell opens the frame up by nearly 20%, giving you a bigger hole to hit during a reload. Under stress, you need all the help you can get.
The front of the Patriot magwell is open. Because the base of the magazine sits just below flush of the magwell, the open front will allow you to extract the magazine from the firearm manually by hand in the event your magazine gets jammed and will not drop free.
We recommend that you blend your frame to the magwell in order to have the smoothest transition possible. Blending is best done with the use of a Dremel tool. Go slow with the Dremel – use at your own risk!
Fits XD and XD MOD.2 in 9/40/357 Service and Tactical models only. Will NOT fit 45ACP or 10MM models.
DO NOT OVERTIGHTEN SCREWS OR YOU RISK STRIPPING THE SCREW HEADS.
1/16″ Hex key required for installation
Note: When installed on a MOD.2 frame, there will be a slight gap visible from the underside, between the frame and the magwell. This is normal, to be expected and has no impact on the performance or aesthetics of the part.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov