Machined from stainless steel bar stock, this part will fit XD Slim models in 9MM, 40SW and 45ACP.
Note: Simple adjustment required when installing on MOD.2 models. Select “YES” if you would like us to email you the Adjustment Guide.
Part is Black (Cerakote)
Over a period of eight months, the team at PistolGear has gone through several design iterations for this part. The PistolGear XD Slim Slide Stop takes the best of each of those tried designs and consolidated them into one design for the sake of maximum form, function, simplicity and safety. It is our hope and intent that you will appreciate this part as much as we do.
While considering this part for your XD-S, we suggest you review the following points:
Form. The XD-S is a “carry” gun for the purpose of personal defense. For this reason, when using a proper thumbs-forward grip, the paddle design of PistolGear Slide Stop offers the thumb of your strong hand* a place to rest – think of it like the safety on a 1911. The downward pressure from your thumb helps to reduce felt recoil and muzzle flip during live fire. A need for those who like the power of 45ACP but don’t like the abuse doled out by this load when combined with the XD Slim’s small frame. Please note that if your thumb does ride the paddle during live fire, there is a good chance that your slide will not lock back after the last round if fired since you will be holding the slide stop down.
Function. The XD Slim, because of its short barrel length, has a very heavy recoil assembly which ensures that the slide goes into battery during live fire. However, because the gun is sprung so heavy, using the stock slide stop takes a great deal of force to release because the amount of forward pressure on the slide stop. For many XD-S owners, it is a difficult and sometimes painful feat to press the stock slide stop down in order to release the slide. The PistolGear XD Slim Slide Stop was designed to give all XD Slim owners a means of dropping the slide with as little effort as possible. The length, width and shape of the paddle puts the downward pressure in the correct location. Our testing shows that the effort required to drop the slide is significantly less than the stock slide stop and even those who lack dexterity and strength will find that dropping the slide using the PistolGear XD-S Slide Stop will be both easier and less painful.
Safety. Because the XD Slim is a small-frame pistol, we wanted our design to help keep your hand away from the muzzle at all times. Hand-cycling the slide on small pistols, typically done with a reverse-overhand movement, while under stress increases the chance of personal injury. One may pass their hand in front of the muzzle while racking the slide, while at the same time inadvertently pulling the trigger. Stress makes the body do crazy things. Think it can’t happen? Think again. By releasing the slide with the use of the slide stop ensures that your support hand is away from the muzzle – where it should be – while charging the pistol with a new round.
Simplicity. Sure, the PistolGear Slide Stop is simple to use and operate. The PistolGear Slide Stop is also easy to install. Please see the below video for some direction.
* comment assumes you are right handed.
XD-S is a registered trademark of Springfield Armory
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov