PistolGear Xtractor Removal Tool for

$15.95

Springfield XD Extractor Removal Tool.  If you are looking to properly clean or remove your XD or XD-M extractor, make life easier and use this tool. Whether you need to replace a broken extractor or clean off the built up carbon and grime properly, this tool makes the effort of removing the extractor quick and easy.

Out of stock

Stock Notification List

Loading...

Description

Springfield XD Extractor Removal Tool.  If you are looking to properly clean or remove your XD or XD-M extractor, make life easier and use this tool. Whether you need to replace a broken extractor or clean off the built up carbon and grime properly, this tool makes the effort of removing the extractor quick and easy.

We have found, and we suggest, that you apply some penetrating oil around your extractor and allow it to soak for a couple hours to help with removal. This is especially important if your gun is dirty and there is some carbon build up around the extractor.

Note: If you DO NOT remove the striker safety retaining pin from your slide, you will break the tip of the tool. You must remove the pin before attempting to lift the extractor from the slide.

 

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov

Additional information

Weight 0.1 lbs

34 reviews for PistolGear Xtractor Removal Tool for

  1. XDOhio

    This tool makes it super-easy to remove the extractor on the XD. I received the tool within a few days of ordering and had my extractor out within a couple minutes! The tool works just as advertised (and shown in the video on this site). Thanks for making a painful task pleasantly simple.

  2. Dave B

    Just tried out my new PistolGear Xtractor tool on my XDm 9mm. Makes taking out the extractor VERY simple! Glad I have it in my tool bag!)

  3. George Strayer

    I have cleaned my extractor in 4 years. The reason was I couldnt remove it. I bought this tool and have the extractor out in 10 minutes. I am very impressed with this product.)

  4. Adam

    This worked outstanding on my Service and Tactical XD models, but not on my SC. It wouldn’t get deep enough up under extractor. Every time I rocked it back it would slip out from under extractor.

  5. Josh

    This handy tool is a MUST HAVE for your XD/XDM cleaning kit and does exactly what it says. It makes getting that pesky extractor out of the slide a piece of cake. It works on both my 4.5″ XDM and my 3″ XD Subcompact. Im not sure why others say it doesnt work on the subcompact. Mine is less than a year old so maybe it works on the newer models? Get one!!)

  6. Randy Hitch

    I just used this tool for the first time. It works as advertised. I ordered this tool and the Gun Guide together. Also, the video is awesome!! I watched it twice and was able to take the slide all the way down without referring to the guide once. Thanks Pistol Gear

  7. Kevin

    This tool makes it easier to take out the extractor and safer too!!!!

  8. Ronster

    The Xtractor Tool is well made and makes extractor removal on an XD Service easy. I highly recommend it.

  9. Phil

    Works very well. Make sure you remove long retaining pin that goes through firing pin safety and into extractor or the tool will NOT do its job and you will break the tool.

  10. Tyler

    This is a must have if you own an XD(m)! I have a 3.8 in .40sw and after a few thousand rounds I needed to clean my extractor and this tool worked AMAZING for removing it. I also bought this tool over 2 years ago and it has held up very very well. I would highly recommend the extractor tool.

  11. RSanchez

    I can’t believe how easy is to remove the extractor with this tool. If you have and XD and/or XDM you must have this tool.

  12. FreedomFries

    I cannot believe it, the extractor practically fell out. I was shocked how well this tool performed after spending so much time trying to get the extractor out prior to getting the tool. If you own a XD you MUST get this tool!

  13. Terry Bowling

    The Xtractor Tool works better than advertised. I have 4 XDs and couldn’t be happier on how easy it is now to remove the extractors for cleaning and maintenance. Thanks PistolGear !

  14. John Dees

    There is no other tool I can praise so highly and recommend to every Springfield XD owner. Even if you think you don’t need it and you never disassemble your slide that far, you should have this. It makes the complete cleaning and lubing so easy that you will actually do it more often… LOVE this.

  15. Rayland

    makes job much easier

  16. Samuel G.

    Item shipped quickly. It’s exactly what I needed.

  17. Chris

    Best customer service you could ask for. Tool is great, shipped quickly, will buy from them again.

  18. David

    High quality and well made.

  19. Mathew S.

    Perfect in every way!

  20. Charles Yoerger

    Have not had the chance to use yet

  21. David F Rice

    This item successfully removed the extractor from my Springfield XDm 10mm pistol.

  22. THOMAS L.

    Fast delivery. Very well made tool. Works great on removing extractor. Company video explains how the tool should be used. Excellent.

  23. Louis S.

    Right tool for the job

  24. Aileen

    The item was delivered very quickly.

  25. KEVIN

    Nice quality tool

  26. Travis

    Great little tool, video was helpful!!

  27. Jonathan

    Need the tool! Got it fast🇺🇸

  28. Don Whiteside

    I purchased this tool so I could remove the extractor on an XD slide. This tool is a must have for removing an extractor on a Springfield XD slide. Shopping couldn’t have been any easier or simple, and the price was very affordable. Thank you PistolGear.

  29. Thomas Wilfahrt

    Helpful tool, worked great removing extractor. A must have for all XD owners.

  30. Lucas Shanley

    Solid, must own tool if you own an XD. Its a dead simple extraction but the ability to remove makes cleaning your pistol easy and you can be sure you’re getting all the nooks 🙂

  31. Anonymous

    Well made and good value.

  32. Anonymous

    Great tool and a must have ! was simple to use and helped pull the extractor out of my XD40 easily, AAA+++++

  33. Jerry F.

    A good place to shop XD parts

  34. Matt P.

    Great product! Fast shipping!

Add a review

Your email address will not be published. Required fields are marked *