Description
Springfield XDM Recoil Spring for the Springfield XD(M) 4.5 and 5.25 9MM, 10MM, 40SW and 45ACP, and XD MOD.2 Tactical models that will allow you to tune your gun to your loads. This spring option will work with the stock XD(M) Guide Rod, the PistolGear’s solid Guide Rod for the XD(M) and PistolGear’s Heavy Guide Rod for the XD(M).
For use on Elite Series models, this part replaces the factory, dual-captive recoil assembly when used with Solid Guide Rod options.
Note: For XD(M) 4.5 and 5.25, and MOD.2 Tactical Models Only!
-
Reduced Power Loads: 14 & 16 Pounds
-
Factory Level Loads: 18 Pounds
-
+P Loads: 20 & 20 Pounds (suggested weight for 10MM models)
Made by W.C. Wolff Company
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov
Richard –
I recently purchased the 20 and 22 lbs springs for my XDm 9mm full size. I installed the 20 lb spring and have fired about 150 rounds using it. I’m very happy with the 9mm performance with the spring. It made a noticeable difference in the recoil with no impact on accuracy. I have not tried the 22lb spring yet–I’m waiting on the arrival of some Buffalo Bore 9mm+p+penetrator ammo to try it with.
Clyde Howard –
I purchased the recoil spring #54216, l6 lb. for an XDM4.5 .45ACP. It cycles with 200 gr. swc & 3.7 gr. Bulseye. That’s what I got it for, thanks.
RJ Hussey –
The spring is the original Wolff spring system and it works great but the unexpected super fast shipping was the surprise! From order time to receiving time was just 3 days, that is the fastest turn around time I have ever had, so great job and will order again too see it that was a fluke or consistent speedy service!
Jesse –
I bought the 20lb spring to go with my .357sig barrel and new guide rod. Fits great, also came with a firing pin spring in the kit…
Carlton –
I ordered recoil springs for the 2011 I built and my Springfield XDm 5.25″ 9mm, and in only a couple of days the parts arrived. This is perhaps the quickest service I’ve seen. The only complaint I could possibly make is that PistolGear doesn’t carry parts for my Glocks as well, but what they do carry is quality!
William C. –
Haven’t had a chance to wring these out at the range (yet), but they arrived fast (kudos, PistolGear) and they appear solid and cleanly manufactured. Put in the 14-pound spring and could immediately tell that racking the slide was about midway between Springfield standard (18-pound spring) and Glock standard (9-10 pounds).
Joshua T. –
They work.
Charles Abernathy –
Got part very quickly I would not hesitate to do business with this company again.
Jason F. –
Tamed the recoil xdm 10 mm
Anonymous –
Works great.
Brian W. –
Works like a champ for reduced loads
Thomas E. –
Really fast delivery, thank you. My 10mm full power 200 gr xtp loads are now fully reliable while Huckleberry picking in Grizzly country.
Rick –
Helps with recoil management
Gerald –
shot 180gr and 200gr 10mm hot loads out of XDM and the recoil spring worked great. no malfunctions and brass didn’t fly as far as it was before.
Anonymous –
So first I ordered a wrong spring and it was my own fault 😊 then when I ordered the right one for my springfield XD -9 Tactical 5” pistol it fits well. I bought two different ones 17lb and 15 lb. The 17 lb spring doesnt make much difference as this model comes with 18/20 lb spring from the factory, but when i tried 15lb it significantly reduced the recoil, i could feel it. Definitely less recoil with 15lb and no more snaps. Instead of buying $100 + recoil reduction system this $9 spring will do the magic. Though buy 2-3 different weights and see which one works best with your gun. Highly recommended!
Brian –
Superb service, incredibly fast shipping and a great product
John –
Great springs, work great with a comp and major power ammo.
Bryan Blank –
Needed product, delivered fast. Exactly what was needed
Scott L. –
Super fast delivery, great service.
22# spring, in xdm 4.5 in 10 mm, works with all ammo tried from 140 gr jhp to 220 gr cast and everything in between. Will definitely be a regular customer !
Carl Dean –
Good quality and price
Lawrence Beech –
Product was as described. Great quality.
Anonymous –
Easy to navigate site, easy to order parts, and fast shipping.
Barrett T. –
Perfect fit, high quality spring. I’m using it along with the ‘Heavy’ guide rod to tune my XDm.
bill –
Put the 22lb spring in a 10mm xdm 5.25” barrel. Now I don’t have to go to the next county to find my brass. Shipping was quick. All is good.
Larry –
Works as advertised, good value
PistolGear Support –
We never said the customer is at fault. We suggested reasons why the gun is not running and spring is just one of several reasons for the issue.