Striker Retaining Pin (Coiled, 3 Pack)

$4.00

We often get asked by folks as to what is the number one part that will likely fail on the XD or the XDm. Even as rugged at the platform is, the one part that is most likely to fail is the factory striker retainer pin. The part does not fail because it is “cheap” but because once installed acts as a thin walled, hollow dowel. After constant contact by the striker, the factory pin, at some point will break into small bits.

See below for additional product information…

In stock

Loading...

Description

We often get asked by folks as to what is the number one part that will likely fail on the XD or the XDm. Even as rugged at the platform is, the one part that is most likely to fail is the factory striker retainer pin. The part does not fail because it is “cheap” but because once installed acts as a thin walled, hollow dowel. After constant contact by the striker, the factory pin, at some point will break into small bits.

This coiled pin option, once installed, becomes a nearly solid dowel which is able to handle the abuse of the striker for a very long time. For most, this part will last a lifetime.

This pin is a heavy duty part made of 420 chrome stainless with a passivated finish in order to reduce corrosion.  

This part will not fit the XD SLIM. 

Please note that this is an alternative solution to the part noted #35 in the XD Parts Schematic

This part is sold in a pack of three. 

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov

Additional information

Weight 0.1 lbs

44 reviews for Striker Retaining Pin (Coiled, 3 Pack)

  1. Dean Williams

    I purchased this pin from PistolGear and had it installed in my XDM five days later. The pin fits perfectly and I can tell why it is stronger than the factory part. I feel a lot more confident in my gun now. Thanks PistolGear!!

  2. RC

    Great Product!! Spend the 2 bucks and you have 0 worries about this ever breaking

  3. Eric

    Easy install, cheapest and most needed upgrade to any XD.

  4. Stephen

    I love my XD but always worried about the retainer pin breaking when I need it most (Murphy’s Law). This replacement does so well Springfield should stop using the factory one and install this at time of assembly.

  5. Firman

    product was kind of snug, but overall very sturdy cant wait to use and abuse to see how long it lasts.

  6. PhillyIW86

    I just installed this on my XDM 40. Way better than the stock pin. This is how SA should have built the pistol from factory. I originally ordered for the “just in case factor.” Well, I’m here to tell ya get that stock pin OUT! I inspected the stock one once out, and yep there was a crack in it! I’m glad I ordered it! Thanks PistolGear for prompt service and on time shipping.

  7. G.Hill

    Two buck to not have to worry about a broken or bent stock unit is sooo worth it. Be sure to use a roll pin punch to avoid damage or an ugly oops on your slide.

  8. Mr.B

    This should be the stock part, a huge improvement over the weak roll pin from SA. It was easy to install with the proper tools and gives me peace of mind knowing its much less likely to fail.

  9. JD

    A MUST HAVE FOR SURE FOR ALL XDM OWNERS.

  10. Sam

    This pin is far more sturdy and structurally sound then the OEM one and at a great price

  11. MM_AZ

    Great quality and easy to install

  12. Tony H

    I just received this pin to replace the factory one in my XDSC. I messed up the factory one removing it so I ordered this as a replacement. The pin went it with little effort. They have a very slight taper on the ends which aid in installation, great part.

  13. Anton S.

    The XD / XDm platform is already a very rugged and durable pistol but having this part made it even MORE rugged and durable. Definitely a must have for all XD/XDm owners.

  14. Tom

    I am the owner of XD9 tactical, XD9 Service and XD 357 Service. While replacing all 3 retaining pins I found that my XD tactical stock pin was fatigued and warped. The other 2 were ok but replaced all 3 due to the fact that the replacement coiled pins are superior in strength compared to the factory pins. thanks!!!

  15. rickman30

    I too found my striker pin deformed when removing. Feel much better about having this replacement installed.

  16. msk

    seems very durable. be sure your punch is long enough

  17. Wolfgang

    This part looks a lot more durable than the factory part. Fit and function are flawless. For $ 2 you really can’t go wrong.

  18. Tyler H

    Considering the price of the part and the peace of mind it offers I don’t see why one wouldn’t pick some up. I’v upgraded my pin and my father’s with these. I suggest placing placing an order for a few of these when you decide to get them. Thanks for the great products, PG.

  19. Jew586

    I had ordered these parts as backup to my original retainer pin. Better to be safe then sorry! The service was great, shipping was fast! Great job, Pistol Gear!

  20. Rando

    Works great and easy to replace.

  21. Stephen H.

    Much better than the factory roll pin. I picked up 2 just for the heck of it. Superior quality, easy to install and GREAT service as usual from Pistol Gear. THANKS!!!!

  22. DR

    Ordering from Pistolgear is always a pleasure! I told friends about this and ended up ordering 7 … takes all of 5 minutes to change out. I ended up doing both sons, mine and three of my friends.

  23. Shane

    I just received my pins today and they fit perfectly into the slide. It’s very clear to tell that they are far superior to the OEM roll pin that comes in the slide from the factory.

  24. John Z in OH

    I have 3000+ rounds through my XDm and never had an issue with the factory pin. But when I pulled it out, I can see that it takes a beating. These coiled replacements are inexpensive enough that I put one in for good measure. Easy.

  25. Fred Allen

    Must have. Springfield should be installing these by default.

  26. Anonymous

    Perfect fit.

  27. David

    High quality, much better than original pin that deformed.

  28. Charles Yoerger

    Went in flawlessly!

  29. James Setran

    I cannot believe Springfield pistols ship fitted with a fragile split pin…so glad Pistol Gear offers a sturdy roll pin as a striker stop option!! Perfect fitment too…

  30. Kevin B.

    Since I was paying shipping on a small order I order a couple of these… where else are you going to find these??

  31. Richard C.

    These are a must, we change out all the factory ones for these. You would be surprised how many factory ones are broke when you knock them out. Just a surpiorior part.

  32. Larry K.

    As advertised, quick shipping. Thank you

  33. Floyd Hawk

    Pistol gear offered these at a good price and shipped them fast. Just recently learned this part most likely to fail so I got 3. Hope I never need them but just in case I’m well stocked now.

  34. KEVIN

    haven’t used them YET but seem very sturdy

  35. Joe J.

    Ordered as spare part. Delivered as promised.

  36. Richard Hamilton

    Product was great and worked as advertised, but shipping was terrible, took 3 days to get it shipped and almost another week to get it to my mailbox.

  37. Jerry F.

    A good place to shop XD parts

  38. Anonymous

    Exactly what I needed and well made, good price, shipped quickly.

  39. Francis Cassano

    Good product, good price, and fast shipping. That checks all the boxes.

  40. Michael H.

    If you dry fire a lot, the OEM Stiker Retainer Pin will eventually break. It’s much easier to remove and replace before it breaks. Put these in all of your XD Mod 2 and XDM Pistols.

  41. Anonymous

    Great product worked great. It took a while to get to me, but considering the state of the nation right now I figured it may happen. I would definitely recommend to others.

  42. DAVID D.

    It was a perfect replacement for the little pin that got away.

  43. Richard B

    Exactly what I was looking for

  44. Anonymous

    OEM wasn’t broken yet after 6k rounds and many more dry fires, but this was cheap as a preventative maintenance item, and came with spares when i inevitably lose one.

Add a review

Your email address will not be published. Required fields are marked *